SURAT ADVANCED FABRICATION FACILITY

5-STAGE BATTERY FABRICATION PIPELINE

At Torqa EV, battery manufacturing is treated as aerospace-grade precision engineering. We eliminate thermal hot spots, contact resistance, and premature cell aging through surgical manufacturing automation.

01

Optical & Impedance (IR) Cell Grading

Every cylindrical (21700 / 32700) or prismatic cell undergoes 100% incoming inspection using computerized AC internal resistance meters (1kHz) and 4-point OCV scanners. Any cell with >0.2mΩ internal impedance deviation is rejected.

< 0.2 mΩ tolerance
02

Automated CNC Fiber Laser Micro-Welding

We discard unreliable manual spot welders. Our optical fiber laser welder fires 15-millisecond controlled bursts, fusing pure copper-nickel sandwich busbars. The Heat-Affected Zone (HAZ) is limited to 0.2mm, keeping internal jelly-rolls cool.

15ms pulse • 0.08 mΩ joint
03

Smart Active BMS Integration & Flashing

Each pack is equipped with custom programmed battery management systems featuring active dynamic balancing (up to 1.2A), CANbus 2.0B, RS485, and dual Bluetooth. Multi-point NTC thermistors probe internal cell series.

CANbus 2.0B / Bluetooth
04

Multi-Tier Thermal Runaway Defense Matrix

Engineered for India’s 48°C ambient heat: UL94-V0 flame-retardant structural brackets maintain a mandatory 1.5mm air gap. High-density silica aerogel barriers insulate adjacent parallel series against thermal propagation.

AIS-156 Amend. 3 Ready
05

100% Dynamic Load & Environmental Soak QA

Before dispatch, every completed battery pack undergoes a full 0.5C charge and 1.0C continuous load discharge on computerized regenerative cyclers while logging thermal delta and capacity down to single milliamp-hours.

100% Cycle Validated
Material Science Decision Guide

LiFePO4 ($LiFePO_4$) vs. NMC Battery Chemistry

Understanding the trade-offs in voltage plateaus, thermal runaway safety thresholds, and cost-per-kilometer for Indian commercial fleets.

Metric / ParameterLiFePO4 (LFP)Nickel Manganese Cobalt (NMC)
Nominal Cell Voltage3.2 V (Flatter discharge plateau)3.6 V - 3.7 V (Higher pack voltage per cell)
Thermal Runaway Onset~270°C (Inherent thermal safety)~210°C (Requires active thermal monitoring)
Gravimetric Energy Density140 - 170 Wh/kg220 - 260 Wh/kg (Lighter pack weight)
Cycle Life (80% Retention)2,500 to 3,500+ full cycles1,000 to 1,500 full cycles
Indian Climate ResistanceExceptional in 48°C ambient heatRequires aerogel interlayers & active BMS
Best ApplicationCommercial 3W, E-Rickshaw, Delivery 2W, ESSHigh-speed sport e-motorcycles & light racers

Require Custom Pack Dimensions for Your OEM or Retrofit?

We fabricate custom form-factors with CAD-optimized sheet metal housings, waterproof connectors, and customized BMS protocols.