EV Safety & Care6 min read10 Nov 2026
The Science of Thermal Runaway Prevention: Aerogel Insulation & Multi-Tier Safety Architecture
How Torqa EV implements AIS-156 Amendment 3 compliance with flame-retardant structural cell holders, aerogel insulation blankets, and microsecond BMS short-circuit mitigation.
TE
Paras Dudhat & Safety LabFounder & Safety Compliance Head
Key Engineering Takeaways
- Silica aerogel insulation blocks thermal propagation between adjacent cells up to 1000°C
- Pressure relief valves and explosion-proof membrane venting in all IP67 housings
- Dual hardware MOS temperature cutoffs respond in under 15 milliseconds
Understanding Thermal Propagation in Lithium Packs
Thermal runaway occurs when an internal defect, physical crush, or extreme electrical overload causes an exothermic chemical reaction inside a cell. If adjacent cells absorb this heat, a cascading chain reaction occurs. True EV safety engineering must ensure that if one cell suffers a catastrophic defect, the failure remains isolated and cannot propagate.
Torqa EV 4-Tier Defensive Safety Matrix
1. Physical Cell Separation: Fire-retardant UL94-V0 polycarbonate brackets enforce a mandatory 1.5mm air gap between every 21700 and 32700 cylinder, preventing conduction heating.
2. Silica Aerogel Interlayers: Nano-porous aerogel sheets with thermal conductivity of only 0.018 W/m·K isolate parallel groups from series neighbours.
3. Smart Redundant BMS: Multi-point NTC thermistors probe internal cell hotspots. If temperatures rise above 60°C, high-discharge is capped; at 65°C, circuit breakers trip instantly.
4. IP67 Extruded Enclosures: Sealed with silicone gaskets and waterproof breather membranes that vent pressure while preventing moisture or water ingress.
Experience Similar Symptoms on Your Fleet or Scooter?
Bring your pack to our Surat laboratory for an automated multi-channel impedance scan and active cell balancing consultation with Founder Paras Dudhat.