Back to Engineering Blog
Battery Manufacturing5 min read1 Nov 2026

Laser Welding vs Spot Welding in EV Battery Assembly: Thermal Runaway & Internal Resistance

Examining why automated CNC laser welding and precision transistor spot-welding prevent terminal damage and deliver 40% lower contact resistance in custom battery packs.

TE
Torqa EV Manufacturing TeamAutomation & Fabrication Leads
Share
Key Engineering Takeaways
  • Laser welding achieves fusion depth of 0.3mm with zero mechanical pressure on the cell seal
  • Joint electrical contact resistance drops below 0.08 mΩ per weld point
  • Eliminates terminal thermal shock that degrades cathode jelly-roll membranes

The Critical Nature of the Cell-to-Busbar Interface

In a 72V 60Ah electric motorcycle pack delivering 60A continuous and 120A peak discharge current, even a tiny 2 mΩ contact resistance across interconnect busbars will generate over 28 Watts of localized parasitic heat ($I^2R$). This localized heat accelerates electrolyte decomposition and creates thermal hot spots.

Why Manual Resistance Spot Welding Fails Over Time

Traditional manual spot welders rely on operator hand pressure and copper electrode wear. Inconsistent electrode pressure leads to: - Incomplete fusion joints that vibrate loose on Indian road bumps. - Excessive penetration that burns through the negative cell casing, damaging the internal polymer separator. - Sparks and carbon soot deposits that degrade electrical conductivity.

Torqa EV CNC Transistor & Fiber Laser Welding Process

At Torqa EV Surat, all series and parallel interconnections are performed using automated micro-pulse transistor welders and CNC optical laser systems. Our fiber laser delivers 15-millisecond controlled energy bursts, fusing pure copper-nickel composite sheets with sub-millimeter precision. The thermal heat-affected zone (HAZ) is confined to under 0.2mm, keeping the underlying battery chemistry completely cool.

Experience Similar Symptoms on Your Fleet or Scooter?

Bring your pack to our Surat laboratory for an automated multi-channel impedance scan and active cell balancing consultation with Founder Paras Dudhat.